The effect of magnetic pump pressure holding and preventive measures

　　The effects of holding pressure in magnetic pumps

　　Production is hindered:

　　Magnetic pump holding pressure will reduce the flow of water, resulting in subsequent processes can not be carried out properly, which in turn affects the production schedule and production costs.

　　Equipment damage:

　　If the gas generated during the pressure holding process stays in the pump cavity for a long time, it will cause great damage to the equipment, increase the maintenance cost of the equipment and shorten the service life of the equipment.

　　Lower head:

　　When holding pressure, the pressure in the pump chamber will reach a value higher than that of normal operation, and the head of the pump will be drastically reduced, and the flow rate will be reduced or even stopped completely.

　　Magnetic pump pressure holding preventive measures

　　Regular inspection and maintenance:

　　Regularly inspect and maintain the magnetic pump and its related equipment to ensure that filters, pipes, etc. are free from obstruction.

　　Control the medium temperature:

　　Take effective measures to control the temperature of the medium, to avoid the expansion of the medium on the flow.

　　Increase the speed of the equipment:

　　Ensure that the magnetic pump operates at the rated speed to avoid insufficient flow caused by too low a speed.

　　Replace worn parts:

　　Regularly check and replace worn seals, impellers and other parts to maintain stable equipment performance.

　　Through the above measures, you can effectively prevent the occurrence of magnetic pump pressure holding phenomenon, to ensure the normal operation of the magnetic pump and the smooth progress of production.