Which is the best acid and alkali resistant magnetic pump?

　　Corrosion-resistant magnetic pump, as the name implies, is a pump with corrosion resistance, mainly used to transport corrosive liquids, is a general-purpose equipment magnetic pump inside the more widely used kind of pump.

　　Acid and alkali magnetic pump which is good

　　At present, the domestic market to transport corrosive liquids are more corrosive pumps made of FRPP/PVDF, because of its manufacturing materials have a wide range of corrosion resistance, superior, easy maintenance and easy to operate advantages, acid and alkali resistant magnetic pumps are suitable for a variety of acid and alkali corrosive chemical liquids, sewage pumping, recycling, discharge, etc., widely used in electroplating, electronics, chemicals, leather, dyeing and finishing wastewater, waste gas, etc., the industry, and so on. Acid and alkali resistant magnetic pump series pump head is connected with motor by coupling, high power models are favored by high flow users.

　　Advantages of SHIDEBAO acid and alkali resistant magnetic pumps

　　Advantages of acid and alkali resistant magnetic pump include, completely leakage free, large clearance between inner and outer rotor is possible, thickness of non-metallic isolation sleeve is not more than 8mm, thickness of metal isolation sleeve is not more than 5mm, wall thickness of isolation sleeve is larger, less possibility of isolation sleeve being worn through, clearance between isolation sleeve and inner and outer magnetic rotor is also larger, reliable operation of the magnetic pump, less possibility of wear between inner magnetic rotor and isolation sleeve caused by wear of the shaft seal, isolation sleeve, easy to dismantle, can be replaced on site, easy maintenance, good wear resistance, pump speed is not affected by motor wear, good service life, the pump speed is not affected by motor wear. The possibility of wear of the inner magnetic rotor and the isolation sleeve due to the wear of the shaft seal is small, the isolation sleeve, easy to dismantle, can be replaced at the scene, easy to repair, can be applied to the SIC bearings, good abrasion resistance, long service life, and the speed of the pump is not limited by the motor.